Some Things to Check Before Repairing a Garage Door

Overhead garage door repair in Houston, TX, whether they roll up in sections or swing up in one piece, operate on spring tension. The door moves on metal tracks on the garage walls, and a heavy spring or springs provide the power. In most cases when the door doesn’t work easily, repairs are fairly simple.

Garage door repairHere are some helpful repair and home improvement tips:

Check the metal tracks inside the garage. Look at the mounting brackets that hold the tracks to the walls. If they’re loose, tighten the bolts or screws at the brackets. Working inside the garage with the garage door closed; examine the tracks for dents, crimps, or flat spots. If there are any damaged spots, pound them out with a rubber mallet, or with a hammer and a block of scrap wood. If the tracks are badly damaged, they should be replaced. Check out this site http://www.garagedoorrepairhoustontexas.net/.

Check the tracks with a level to make sure they’re properly aligned. Horizontal tracks should slant slightly down toward the back of the garage; with roll-up doors, the vertical sections of track should be exactly plumb. Both tracks must be at the same height on the garage walls. If the tracks are not properly aligned, loosen but do not remove the screws or bolts that hold the mounting brackets, and tap the tracks carefully into position. Recheck the tracks with the level to make sure they’re in the right position; then tighten the screws or bolts at the mounting brackets.

Clean the tracks with concentrated household cleaner to remove dirt and hardened grease.

You need to clean the rollers thoroughly, and wipe both tracks and rollers dry. This will make it easy for you’re to repair your garage door in Houston, TX in order to be secured in your cars while you are away or sleeping at night.

 

Related Articles: